窺鏡醫療檢測儀與內窺鏡影像工作站等儀器設備投資大，系統復雜，科技含量高，工作環境要求高，對其安裝操作使用等方面均有嚴格要求；保證儀器經常處于良好工作狀態，發揮其應有效能，對提高醫療服務質帚和實現預期效益意義重大：而積極搞好設備維修工作，就尤為重要。根據防治結合，以防為主的維修新觀念，維修應包括維護保養和故障檢修兩個部分。

The investment in equipment such as endoscopic medical detectors and endoscopic imaging workstations is large, the system is complex, the technology content is high, and the working environment requirements are high. Strict requirements are placed on their installation, operation, and use; Ensuring that the instrument is constantly in good working condition and exerting its effective capabilities is of great significance for improving the quality of medical services and achieving expected benefits. Actively carrying out equipment maintenance work is particularly important. According to the new maintenance concept of combining prevention and control and prioritizing prevention, maintenance should include two parts: maintenance and troubleshooting.

和其他的醫療設備一樣，為了保證醫療內窺鏡設備的精準性，日常的維護保養工作是很重要的，維護保養屬于主動維修，又稱超前維修，預防性維修。

Like other medical devices, in order to ensure the accuracy of medical endoscope equipment, daily maintenance and upkeep are very important. Maintenance and upkeep belong to proactive maintenance, also known as advanced maintenance or preventive maintenance.

內窺鏡的使用，日常維護一般由使用科室和操作人員完成.它是一項每天都要進行的工作，應該制度化，它的內容應寫進操作規程和注意事項：使用科室應選派1名懂得一定儀器知識，責任心強的技術員擔任專職或兼職儀管員，協助和指導操作人員做好這一工作。日常維護工作的內容一般包括：

The use and daily maintenance of endoscopes are generally carried out by the using department and operators. It is a daily task that should be institutionalized, and its content should be included in the operating procedures and precautions. The using department should appoint a technician who knows certain instrument knowledge and has a strong sense of responsibility as a full-time or part-time instrument controller to assist and guide operators in doing this work well. The content of daily maintenance work generally includes:

⑴機房及儀器設備的保潔；觀察調整機房溫度、濕度穩定。

(1) Cleaning of the computer room and instrument equipment; Observe and adjust the temperature and humidity in the computer room to stabilize.

⑵檢查機器的機械、轉動、氣路、水路，螺釘、螺母等部位是否正常。

⑵ Check whether the mechanical, rotational, pneumatic, water, screws, nuts, and other parts of the machine are normal.

⑶檢查儀器表面的開關、旋鈕，指示燈、儀表及顯示參數是否正常。

⑶ Check whether the switches, knobs, indicator lights, instruments, and display parameters on the surface of the instrument are normal.

⑷正式工作前，利用儀器自檢程序檢測儀器各部分的狀態情況。

Before starting work, use the instrument self inspection program to check the status of each part of the instrument.

⑸注意儀器在運行過程中有否異常氣味和聲音，圖像質量是否正常。

(5) Pay attention to whether there are any abnormal odors and sounds during the operation of the instrument, and whether the image quality is normal.

⑹檢查操作人員操作儀器是否符合規程，并及時糾正。

Check whether the operators operate the instruments in accordance with the regulations and correct them in a timely manner.

本文來自：內窺鏡設備維修更多的內容請點擊：http://www.zfmm400.com我們將會為您提問的問題提供一個滿意的服務，歡迎您的來電！

This article is from: Endoscopic equipment maintenance. For more information, please click on: http://www.zfmm400.com We will provide satisfactory service for the questions you ask. Welcome to call us!