內窺鏡設備如今是醫學行業使用很頻繁的一種醫用設備，其性能優勢明顯且有效果，當然在使用期間也會有各類問題出現，比如說附件插入問題，那么要如何處理呢？

　　Endoscope equipment is now a medical device that is frequently used in the medical industry. Its performance advantages are obvious and effective. Of course, there will be various problems during the use, such as attachment insertion problem.

　　內窺鏡設備打彎的角度太大→治療附件的柔軟性被其先端硬質部分所限制→產生附件插入的問題。內窺鏡設備被折→導致鉗子管道變形→產生附件插入的問題。不正確的清洗消毒程序→臟物凝固和結晶形成在管道里→產生附件插入的問題。使用損壞的附件→附件在管道里打結→產生附件插入的問題。

　　The Angle of the endoscope equipment is too large → the softness of the treatment accessory is limited by the hard part of its apex → the attachment insertion problem is caused. The endoscope equipment was folded, leading to the deformation of the clamp pipe, and causing problems of attachment insertion. Improper cleaning and disinfection procedures → dirt solidifies and crystals form in pipes → problems with attachment insertion occur. Use damaged accessories → accessories knotted in pipes → problems with attachment insertion.

　　在內窺鏡設備出現的很多故障中，除了探頭本身的自然損耗須更換新探頭之外，探頭的使用環境以及人為等因素引起的故障都是可以通過預防性維護保養來避免。怎樣能避免附件插入的問題？須正確地清洗消毒內窺鏡設備。使用前應認真檢查附件。插入附件時要小心。良好的操作習慣。

　　In many failures of endoscope equipment, in addition to the natural loss of the probe itself to replace the new probe, the use of the probe environment and man-made factors caused by the failure can be avoided through preventive maintenance. How can attachment insertion problems be avoided? Endoscope equipment must be properly cleaned and disinfected. Check the attachment carefully before use. Be careful when inserting attachments. Good operation habits.

　　內窺鏡設備維修人員認為，如果發生故障了，可以通過詢問儀器操作人員(或其他維修人員)了解故障發生前和發生時的情況，如電壓是否正常，是否有異常氣味或異常聲音，故障是突然發生還是逐步形成的，故障是否時有時無，設備的使用年限和故障發生時的使用環境，代換過哪些元件或調動過哪些地方等。

　　Endoscopic equipment maintenance personnel believe that if the failure happens, can by asking the instrument operators (or other maintenance personnel) understand the failure before and at the time of the situation, such as the voltage is normal, whether there are abnormal smell or abnormal sound fault is a sudden or gradually formed, whether the fault, the service life of equipment and fault occurs in the use of the environment, What components have been replaced or what places have been transferred.

　　很多時候內窺鏡設備損壞一般而言均是人為的使用與其他硬物碰撞后導致，此外自身磨損或老化造成電路板燒壞的原因是開關機不正常導致。所以說，使用中造成損壞的可能性非常的大，又因為內窺鏡設備價格比較貴，因此要重視預防性維護保養，預防性維護保養是一項經常性細致的工作，做得好做得認真做得嚴格可以減少很多故障的發生。

　　Most of the time, the damage of endoscope equipment is generally caused by the use of artificial collision with other hard objects, in addition to their own wear or aging caused by the circuit board burned out is caused by abnormal switching machine. Therefore, the possibility of damage in use is very large, and because the price of endoscope equipment is relatively expensive, so we should pay attention to preventive maintenance, preventive maintenance is a regular careful work, do well do seriously do strictly can reduce the occurrence of a lot of failures.

　　內窺鏡設備附件插入的問題如何處理？以上便是問題的講解內容了，所以說您在使用內窺鏡設備工作之前建議是做好檢查工作。更多內容就來網站www.zfmm400.com進行咨詢吧。

　　How to deal with the problem of endoscope equipment attachment insertion? The above is the problem explained content, so you use endoscope equipment before the recommendation is to do a good job of inspection. For more information, please visit www.zfmm400.com.