大家好！我是匠仁醫療的小編，今天給大家介紹一下工業內窺鏡在使用操作上要注意的一些細節。

hello everyone! Today, I'd like to introduce you to some details of the operation of the industrial endoscope.

一我們要了解檢測工件的內部結構特點、檢測具體內容、位置，按程序展開相關鏈接儀器，檢查電源、接地是否可靠、儀器位置安全平穩。

First, we need to understand the internal structure characteristics of the test workpiece, the specific content and location of the test, expand the relevant link instrument according to the program, and check whether the power supply and grounding are reliable, and whether the position of the instrument is safe and stable.

二是選擇合適的探頭、鏡頭及進入產品的通道，檢測前應清楚通道內的障礙、毛刺等可能阻礙、損傷探頭的物體。

The probe, burr, and other obstacles should be clear.

三是對于一些內部無法了解或結構復雜的產品，可使用觀察鏡頭觀察后再進行檢測，檢測中盡量使鏡頭正對檢測區域。

Third, for some products that cannot be understood internally or with complex structure, the observation lens can be used to observe and then detect. During the detection, the lens should be facing the detection area as far as possible.

四是檢測前應使眼睛適應檢測環境及光淺、長時間工作時應注意避免眼睛疲勞，產生人為漏檢。

Fourth, the eyes should be adapted to the testing environment and light before testing, and attention should be paid to avoid eye fatigue and artificial omission when working for a long time.

五是檢測過程中應小心，確保探頭順利到達指定部位、探頭在推進過程中如遇到明顯阻力時，應立即停止前進，探頭退出時應緩慢，如被卡住不能用力拉，以免損壞工件或探頭。

Fifthly, care should be taken in the detection process to ensure that the probe reaches the designated position smoothly. If the probe encounters obvious resistance in the process of propulsion, it should stop advancing immediately. When the probe exits, it should be slow. If it is stuck, it cannot be pulled with force, so as to avoid damaging the workpiece or probe.
                            

六是對采集的圖像進行處理分析。

The sixth is to process and analyze the collected images.

七是按規定清潔探頭，整理儀器、現場。

The seventh is to clean the probe, arrange the instrument and the scene according to the regulations.

八是推薦工作人員可使用輔助工裝幫助探頭順利到達位置。

Eighth, it is recommended that the staff can use the auxiliary tooling to help the probe reach the position smoothly.

九是使用工業內窺鏡設備包括工業內窺鏡及探頭的類型、直徑、型號，工業內窺鏡測量的位置及精度。

The ninth is the use of industrial endoscope equipment, including the type, diameter and model of industrial endoscope and probe, the position and accuracy of industrial endoscope measurement.

十是檢測報告要求。

Ten is the requirement of test report.

感謝您的閱讀，希望以上內容對您有所幫助，如您想了解更多精彩內容請點擊我們的官網：內窺鏡設備維修http://www.zfmm400.com。

Thank you for reading, hope the above content is helpful to you, if you want to know more wonderful content, please click our official website: endoscopic equipment maintenance http://www.zfmm400.com .